Water or oil temp temperature sender, high match, 1/8" thread, cut to length

Description

Temp sender for water or oil.
Temp range: 140 – 280F, high match. Normally used in oil (transmission) temp.
Output (connect to gauge): 240 – 33 ohms, Stewart-Warner standard.
1/8″ NPT thread mounting, 1/2″ long for thread portion. See our fitting set for other thread size below.
Blade connection, with socket and sleeve included
.
0.9” long probe, can be cut to 0.55” probe length, there is a cutting gap on the probe for easy cutting.
Total 1.3″ long below hex head without cutting.
The probe is supposed always to touch the measure fluid, so cut to proper length is important for accurate measurement.
For matching gauges, see below link:
stores.ebay.com/industrialstuffs/1921055017
stores.ebay.com/industrialstuffs/16612838017
For different thread size, 1/4″, 3/8″, 1/2″ NPT, see blow:
www.ebay.com/itm/-/272326336606
We will give you $5.00 refund if you buy the above fitting set.
For other temp senders, see:
stores.ebay.com/Industrialstuffs/4491721017